content loaded
M.A. Ford® TuffCut® XR7 18078715NB 180N Non-Center Cutting Square End End Mill, 20 mm Dia Cutter, 50 mm Length of Cut, 7 Flutes, 20 mm Dia Shank, 150 mm OAL, ALtima® Blaze Coated
mill end 20mm 50mm 7 20mm 150mm rh 38deg
Stellar Part #FORDM 18592
MFG Part #18078715NB
MFG Name:M.A. Ford
Product Description:
M.A. Ford® TuffCut® XR7 End Mill, Non-Center Cutting Square End, Series: 180N, 20 mm Diameter Cutter, 150 mm Overall Length, 50 mm Length of Cut, 7 Flutes, 20 mm Shank Diameter, Right Hand Cutting Direction, 38 deg Helix Angle, Carbide, ALtima® Blaze Coated
Login For Price
- Item Features
- Technical Specifications
- Resources
- 40% increase in productivity over a 5 flute tool
- State of the art ALtima® Blaze PVD coating for superior tool life
- ALtima® Blaze is designed to allow higher material removal rates
- This coating has a higher oxidation temperature than a typical TiAlN coating
- It has shown very good results in nickel alloys, titanium, and other difficult to machine materials
- Tools coated with ALtima® Blaze can be used in dry machining
- 100 mm L neck
- 2 mm corner radius
- +0.000/-0.028 mm tolerance h10
- 3200 HV microhardness
- 2012 deg F maximum service
- Designed specifically for titanium, inconel and similar materials
- 0.35 friction coefficient
- ALtima® Blaze coating for increased performance
- Necked, uniquely designed heli-pitch grinding geometry promotes continual, vibration free cutting regardless of depth of cut or width of cut
- Whisper blend transition between OD and neck
- Reduced vibration harmonics
- Improved part finishes
- Maintains cutting edge strength and sharpness for improved tool life
- Slotting at 1X Dia deep
- 40% increase in productivity over a 5 flute tool
- State of the art ALtima® Blaze PVD coating for superior tool life
- ALtima® Blaze is designed to allow higher material removal rates
- This coating has a higher oxidation temperature than a typical TiAlN coating
- It has shown very good results in nickel alloys, titanium, and other difficult to machine materials
- Tools coated with ALtima® Blaze can be used in dry machining
- 100 mm L neck
- 2 mm corner radius
- +0.000/-0.028 mm tolerance h10
- 3200 HV microhardness
- 2012 deg F maximum service
- Designed specifically for titanium, inconel and similar materials
- 0.35 friction coefficient
- ALtima® Blaze coating for increased performance
- Necked, uniquely designed heli-pitch grinding geometry promotes continual, vibration free cutting regardless of depth of cut or width of cut
- Whisper blend transition between OD and neck
- Reduced vibration harmonics
- Improved part finishes
- Maintains cutting edge strength and sharpness for improved tool life
- Slotting at 1X Dia deep
- Cutting Direction:Right HandFinish:ALtima® Blaze CoatedMaterial:CarbideOverall Length:150 mmSeries:180NType:Non-Center Cutting Square EndCutter Diameter:20 mmHelix Angle:38 degLength of Cut:50 mmNumber of Flutes:7Shank Diameter:20 mm