content loaded
M.A. Ford® TuffCut® GP 16412500C Center Cutting Stub Length Square End End Mill, 1/8 in Dia Cutter, 1/4 in Length of Cut, 2 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, TiCN Coated
mill end 1/8in 1/4in 2 1/8in 1-1/2in rh
Stellar Part #FORDM 56467
MFG Part #16412500C
MFG Name:M.A. Ford
Product Description:
M.A. Ford® TuffCut® GP End Mill, Center Cutting Stub Length Square End, Series: 164, 1/8 in Diameter Cutter, 1-1/2 in Overall Length, 1/4 in Length of Cut, 2 Flutes, 1/8 in Shank Diameter, Right Hand Cutting Direction, 30 deg Helix Angle, Carbide, TiCN Coated
Login For Price
- Item Features
- Technical Specifications
- Resources
- Designed for aggressive milling of most materials with reduced deflection, improved tool life and overall economy
- The added toughness of the TiCN coating makes it a good choice for mechanically stressed edges like in end mill applications
- The higher hardness makes TiCN a good choice for abrasive applications where higher wear resistance is required
- +0.000/-0.002 in tolerance D1
- 3000 HV microhardness
- 752 deg F maximum service
- 0.4 friction coefficient
- Applicable for steel, stainless steel, cast iron, special alloys, 35-65Rc hardened steel and non-ferrous metals
- Whisper blend transition between OD and neck
- Reduced vibration harmonics
- Improved part finishes
- Maintains cutting edge strength and sharpness for improved tool life
- Slotting at 1X Dia deep
- TiCN is a multi-layer coating
- Because of the multi-layer composition, TiCN is tougher than TiN, even though TiCN is harder
- Designed for aggressive milling of most materials with reduced deflection, improved tool life and overall economy
- The added toughness of the TiCN coating makes it a good choice for mechanically stressed edges like in end mill applications
- The higher hardness makes TiCN a good choice for abrasive applications where higher wear resistance is required
- +0.000/-0.002 in tolerance D1
- 3000 HV microhardness
- 752 deg F maximum service
- 0.4 friction coefficient
- Applicable for steel, stainless steel, cast iron, special alloys, 35-65Rc hardened steel and non-ferrous metals
- Whisper blend transition between OD and neck
- Reduced vibration harmonics
- Improved part finishes
- Maintains cutting edge strength and sharpness for improved tool life
- Slotting at 1X Dia deep
- TiCN is a multi-layer coating
- Because of the multi-layer composition, TiCN is tougher than TiN, even though TiCN is harder
- Cutting Direction:Right HandFinish:TiCN CoatedMaterial:CarbideOverall Length:1-1/2 inSeries:164Type:Center Cutting Stub Length Square EndCutter Diameter:1/8 inHelix Angle:30 degLength of Cut:1/4 inNumber of Flutes:2Shank Diameter:1/8 in