content loaded
Stellar Part #MASCH WHAMEX-XT-5 UNDYED
MFG Part #WHMXXT-5G
MFG Name:Master Fluid Solutions
Product Description:
Master STAGES WHMXXT-5G Whamex XT Machine Tool Sump/System Cleaner, 5 gal Pail, Liquid, Straw Yellow, Slight
Login For Price
- Item Features
- Technical Specifications
- Resources
- A very specialized formula that draws on Master Chemical's knowledge of coolant formulation and many years of hands-on experience in machine cleanouts
- Spray down the machine with a 10%-15% Whamex XT™ and water solution using
- 10 at 2% Working Solution, 10.5 at 5% Working Solution pH range
- >200 deg F flash point
- 12 Months shelf life
- Quickly breaks down and lifts off insoluble scum deposits hidden in lines and difficult to reach areas - getting rid of these residues is one of the best ways to extend coolant life in your system
- Very hard water tolerant allowing it to be effective in raw water or used coolant
- Environmental approvals are simplified because Whamex XT™ contains no nitrites, phosphates, barium, phenols, or butyl cellusolve; this formula has very low V.O.C. content and no SARA 313 reportable ingredients
- When used as directed below, this product is compatible with TRIM® brand synthetic, semisynthetic, and soluble oil coolants, as well as most competitive coolants
- Will remove heavy soils from machines without affecting paints, coatings, seals, hoses, or skirting, and it wont leave a slippery residue
- Short-term corrosion inhibitors prevent flash rusting of machine surfaces and ways
- PREFERRED METHOD FOR CLEANING MACHINE TOOLS AND CENTRAL SYSTEMS: Add 1%-3% Whamex XT™ into the machine sump and run machine as normal for at least 24 hours or more for best results, if the machine runs high pressure through-the-tool for significant amounts of time, the cleaner may cause some foam, keep a defoamer, such as Master STAGES™ DF1 or TRIM® TC 239, available during this process
- After the Whamex XT™ has circulated for at least 24 hours, pump out the sump and remove all chips, sludge, residue and swarf. Remember to clean out overflow areas and flumes
- A very specialized formula that draws on Master Chemical's knowledge of coolant formulation and many years of hands-on experience in machine cleanouts
- Spray down the machine with a 10%-15% Whamex XT™ and water solution using
- 10 at 2% Working Solution, 10.5 at 5% Working Solution pH range
- >200 deg F flash point
- 12 Months shelf life
- Quickly breaks down and lifts off insoluble scum deposits hidden in lines and difficult to reach areas - getting rid of these residues is one of the best ways to extend coolant life in your system
- Very hard water tolerant allowing it to be effective in raw water or used coolant
- Environmental approvals are simplified because Whamex XT™ contains no nitrites, phosphates, barium, phenols, or butyl cellusolve; this formula has very low V.O.C. content and no SARA 313 reportable ingredients
- When used as directed below, this product is compatible with TRIM® brand synthetic, semisynthetic, and soluble oil coolants, as well as most competitive coolants
- Will remove heavy soils from machines without affecting paints, coatings, seals, hoses, or skirting, and it wont leave a slippery residue
- Short-term corrosion inhibitors prevent flash rusting of machine surfaces and ways
- PREFERRED METHOD FOR CLEANING MACHINE TOOLS AND CENTRAL SYSTEMS: Add 1%-3% Whamex XT™ into the machine sump and run machine as normal for at least 24 hours or more for best results, if the machine runs high pressure through-the-tool for significant amounts of time, the cleaner may cause some foam, keep a defoamer, such as Master STAGES™ DF1 or TRIM® TC 239, available during this process
- After the Whamex XT™ has circulated for at least 24 hours, pump out the sump and remove all chips, sludge, residue and swarf. Remember to clean out overflow areas and flumes
- In Stock:YesColor:Straw YellowContainer Size:5 galContainer Type:PailForm:LiquidOdor/Scent:SlightSeries:Whamex XT, Whamex XT™Specific Gravity:1.075