Stellar Industrial | Parts Coatings

Parts Coatings

content loaded

Filter

Search Within Category

: 3M (22)
VHT (4)
: Yes (4)
: Acetone, Propane, Butane, Toluene, Xylene, Ethylbenzene (1)
Acetone, Toluene, Propane, Butane, Xylene, Bismuth Vanadate, Ethylbenzene (1)
Acetone, Toluene, Propane, Butane, Xylene, Cobalt Aluminate, Ethylbenzene, Titanium Dioxide (1)
Acetone, Toluene, Propane, Butane, Xylene, Ethylbenzene, Ethyl 3-Ethoxypropionate (1)
Feldspars, Water, Quartz Silica, Polyethylene Glycol, d-Limonene, Glycerin, Ethoxylated C12-C15 Alcohols (1)
Kaolin, Polybutylene, Limestone, Stoddard Solvent, Lecithins, Soya, Palygorskite, Polyethylene, Carbon Black, Quartz Silica (1)
Limestone, Activated Carbon, Carbon Black (2)
Toluene, Kaolin, Dimethyl Ether, Coumarone-Indene Resins, Hydrogenated Styrene-Butadiene Polymer, Hexane, Propane, Propyl Propionate, 3-MethylPentane, Hexane, Branched and Linear, Methylcyclopentane, Quartz Silica, Titanium Dioxide, Benzene, Ethylbenzene (1)
: Beige (2)
Black (2)
Blue (2)
Clear (1)
Dark Gray (2)
Gray (2)
Green (1)
Light Gray (1)
Orange (1)
Part A: Light Gray/Part B: Red (1)
: 0.1 gal (1)
1 gal (4)
1 qt (1)
1.4 fl-oz (2)
11 oz (4)
16 oz (1)
22 fl-oz (1)
23 oz (1)
5 oz (1)
5.5 fl-oz (1)
: Aerosol Can (5)
Can (4)
Cartridge (8)
Flexible Package (1)
Kit (1)
Tube (2)
: 1 hr (2)
2 hr (1)
20 to 30 min (1)
24 hr (1)
4 hr (1)
48 hr (1)
: Flat (4)
High Gloss (1)
: Aerosal Spray (1)
Liquid (8)
Part A: Liquid/Part B: Paste (1)
Part A: Viscous/Part B: Paste (2)
Paste (6)
Powder (2)
Viscous (1)
: Citrus (1)
Odorless (2)
Part A: Low/Non-Detectable/Part B: Slight Ammonia (1)
Part A: Mercaptan/Part B: Epoxy (1)
Part A: Pungent Styrene/Part B: Characteristic (2)
Part A: Pungent Styrene/Part B: Slight Ester (1)
Solvent (4)
Sweet (1)
: 08505 (1)
464 (1)
5857 (1)
5862 (1)
8310 (1)
8323 (1)
8370 (1)
8374 (1)
FLAMEPROOF™ (4)
: -20 to 180 deg F (2)
-20 to 200 deg F (1)
-30 to 200 deg F (1)
1300 to 2000 deg F (4)
180 deg F (1)
: 2-Component 2-Part (2)
2-Component 2-Part Factory Match (1)
2-Component 2-Part Lightweight (1)
Epoxy (1)
Fiberglass Reinforced (1)
Lightweight Filler (1)
Moisture Curing (1)
Non-Shrinking (1)
Seam (1)
Sprayable (1)
: 0.5746 (1)
0.5819 (2)
0.5983 (1)
103 g/L (1)
119 g/L (1)
138 g/L (1)
340 g/L (1)
391 g/L (1)
41 g/L (1)
548 g/L (1)
: 100000 cPs (1)
140000 cPs (1)
15000 to 20000 cPs (1)
150000 cPs (1)
3000 to 7000 cPs (1)
<0.205 sq-cm/s (3)
<20.5 cSt (4)
Part A: 1400 to 2000 cPs, Part B: 1200 to 1600 cPs (1)
Part A: 144000 to 232000 cPs (1)
Part A: 15000 to 25000 cPs (1)
: 7 (4)
7.8 to 8.1 (1)