Stellar Industrial
content loaded
Master STAGES™ WHMXXT-1G Whamex XT™ Machine Tool Sump/System Cleaner, 1 gal Jug, Liquid, Straw Yellow, Slight

Master STAGES™ WHMXXT-1G Whamex XT™ Machine Tool Sump/System Cleaner, 1 gal Jug, Liquid, Straw Yellow, Slight

1gal master stages whamexxt

Stellar Part #MASCH WHAMEX-XT-1 UNDYED

MFG Part #WHMXXT-1G

MFG Name:Master Fluid Solutions

Product Description:

Master STAGES™ Machine Tool Sump/System Cleaner, Series: Whamex XT™, 1 gal, Jug, Liquid, Straw Yellow, Slight, 1.075 Specific Gravity
Login For Price
  • A very specialized formula that draws on Master Chemical's knowledge of coolant formulation and many years of hands-on experience in machine cleanouts
  • Spray down the machine with a 10%-15% Whamex XT™ and water solution using
  • 10 at 2% Working Solution, 10.5 at 5% Working Solution pH range
  • >200 deg F flash point
  • 12 Months shelf life
  • Quickly breaks down and lifts off insoluble scum deposits hidden in lines and difficult to reach areas - getting rid of these residues is one of the best ways to extend coolant life in your system
  • Very hard water tolerant allowing it to be effective in raw water or used coolant
  • Environmental approvals are simplified because Whamex XT™ contains no nitrites, phosphates, barium, phenols, or butyl cellusolve; this formula has very low V.O.C. content and no SARA 313 reportable ingredients
  • When used as directed below, this product is compatible with TRIM® brand synthetic, semisynthetic, and soluble oil coolants, as well as most competitive coolants
  • Will remove heavy soils from machines without affecting paints, coatings, seals, hoses, or skirting, and it wont leave a slippery residue
  • Short-term corrosion inhibitors prevent flash rusting of machine surfaces and ways
  • PREFERRED METHOD FOR CLEANING MACHINE TOOLS AND CENTRAL SYSTEMS: Add 1%-3% Whamex XT™ into the machine sump and run machine as normal for at least 24 hours or more for best results, if the machine runs high pressure through-the-tool for significant amounts of time, the cleaner may cause some foam, keep a defoamer, such as Master STAGES™ DF1 or TRIM® TC 239, available during this process
  • After the Whamex XT™ has circulated for at least 24 hours, pump out the sump and remove all chips, sludge, residue and swarf. Remember to clean out overflow areas and flumes