content loaded
Simpson Strong-Tie® Crack-Pac® ETIPAC10 Injection Epoxy, 9 oz Cartridge, Blue, >250 deg F Flash
injection moulding kit
Stellar Part #SIMPS ETIPAK 10
MFG Part #ETIPAC10
MFG Name:Simpson Strong-Tie
Product Description:
Simpson Strong-Tie® Crack-Pac® Injection Epoxy, Series: ETIPAC10, 9 oz Container, Cartridge Container, Blue, 7 g/L VOC, >250 deg F Flash Point, 24 hr Curing, Bonds To: Concrete, Composition: Bisphenol A-Epichlorohydrin, Benzene-1,3-Dimethaneamine, Diethylenetriamine, 12 pH
Login For Price
- Item Features
- Technical Specifications
- Resources
- Dispenses with a standard caulking tool, no special dispensing tool needed
- 1400 cP viscosity
- 5860 psi tensile strength
- 14% tensile elongation at break
- 11300 psi compressive yield strength
- 319000 psi compressive modulus
- 8020 psi flexural strength
- 0.08% water absorption
- 0.002 linear coefficient of shrinkage
- 16 min gel time
- 30 min full, mixed cartridge
- Clean and easy to mix
- 8:1 mixing ratio
- Seals out moisture, protecting rebar in the concrete from corrosion and flooring from moisture damage
- Chemically bonds with the concrete to restore strength
- Non-shrink material resistant to oils, salts and mild chemicals
- Can be used to inject cracks in dry, damp or wet conditions with excellent results
- Not for use in actively leaking cracks
- In order for components to mix properly, the resin and hardener must be conditioned to 60 - 80 deg F before mixing
- The color of epoxy will change from amber to blue during the cure process and then fade back to light amber within a few weeks of installation
- Dispenses with a standard caulking tool, no special dispensing tool needed
- 1400 cP viscosity
- 5860 psi tensile strength
- 14% tensile elongation at break
- 11300 psi compressive yield strength
- 319000 psi compressive modulus
- 8020 psi flexural strength
- 0.08% water absorption
- 0.002 linear coefficient of shrinkage
- 16 min gel time
- 30 min full, mixed cartridge
- Clean and easy to mix
- 8:1 mixing ratio
- Seals out moisture, protecting rebar in the concrete from corrosion and flooring from moisture damage
- Chemically bonds with the concrete to restore strength
- Non-shrink material resistant to oils, salts and mild chemicals
- Can be used to inject cracks in dry, damp or wet conditions with excellent results
- Not for use in actively leaking cracks
- In order for components to mix properly, the resin and hardener must be conditioned to 60 - 80 deg F before mixing
- The color of epoxy will change from amber to blue during the cure process and then fade back to light amber within a few weeks of installation
- Color:BlueComposition:Bisphenol A-Epichlorohydrin, Benzene-1,3-Dimethaneamine, DiethylenetriamineContainer Size:9 ozContainer Type:CartridgeCuring Time:24 hrpH Range:12Series:ETIPAC10VOC Content:7 g/LBonds To:ConcreteFlash Point:250 deg F, >250 deg F