Stellar Industrial | Epoxy & Structural Adhesives

Epoxy & Structural Adhesives

content loaded

Filter

Search Within Category

: 3M (86)
Devcon (2)
J-B Weld (1)
OTHER (10)
Simpson Strong-Tie (1)
: Yes (20)
: Acrylic (3)
Acrylic Resin/Solvent Activator (1)
Epoxy (3)
Methyl Methacrylate (1)
: Amber (4)
Blue/Opaque/Yellow (1)
Clear/Clear to Slight Yellow (1)
Clear/Yellow/Light/Cream (1)
Gray (1)
Gray/White (1)
Milky White/Translucent/Amber (1)
Off-White/Green (1)
Translucent/Clear/Opaque (1)
White (1)
: Acrylic (1)
Amine Adduct, Tetraethylenepentamine, Triethylenetetramine (1)
Bisphenola/Epichlorohydrin, N-Butyl Glycidyl Ether, Silica, Amorphous (Fumed) (1)
Epoxy Resin, Aluminum Hydroxide, Titanium Dioxide, Epoxy Resin, Distillates, Petroleum, Heavy Thermal Cracked, Ethylene Glycol (1)
Part A: Bisphenol-A Diglycidyl Ether Resin; Part B: Proprietary Components (1)
Part A: Epoxy Resin Silica, Amorphous, Fumed, Crystal Free, Ethylene Glycol; Part B: Polymercaptan Hardener, Substituted Aminophenol, Silica, Amorphous, Fumed, Crystal Free, Ethylene Glycol (1)
Part A: Epoxy Resin Treated Fumed Silica; Part B: Polymercaptan Hardener, Benzyldimethylamine, Treated Fumed Silica, Monoethanolamine (1)
Part A: Methyl Methacrylate, Methacrylate Ester, Methacrylic Acid, Talc; Part B: Benzoyl Peroxide, Epoxy Resin Benzyl Butyl Phthalate (1)
Part A: Talc, Epoxy Resin Titanium Dioxide, Substituted Silane, Aluminum Hydroxide; Part B: Talc, Epoxy Resin/Curing Agent, Quartz (SiO2), Diethylenetriamine 4,4'-isopropylidenediphenol, Substituted Silane, Substituted Piperazine (1)
Polyurethane Methacrylate Resin, 2-Hydroxyethyl Methacrylate, High Boiling Methacrylate, Hydroxyalkyl Methacrylate, Acrylic Acid, Saccharin, Adhesion Promoter, Cumene Hydroperoxide, Saccharin, Cumene (1)
: 0.12 oz (1)
1 oz (1)
200 mL (1)
22 oz (1)
25 mL (2)
300 mL (1)
4 oz (1)
50 mL (4)
6.5 oz (1)
: Bottle (1)
Cartridge (1)
Dual Syringe Tube (1)
Dual-Cartridge (4)
Kit (2)
Mixer Cup (1)
Syringe (2)
Tube (2)
: 1 hr (1)
12 hr (1)
12 hr at 72 deg F (1)
16 hr (1)
24 hr (9)
: Aluminum and Other Metal, Ceramic, Wood, Concrete and Glass (1)
Ceramic, Concrete, Glass, Metal, Plastic and Wood (1)
Ceramic, Ferrite, Metal, Plastic and Wood (2)
Ceramic, Glass, Metal, Plastic, Rubber and Wood (1)
Ceramic, Metal and Plastic (3)
Glass, Hard Plastic, Rubber and Metal (1)
Metal (1)
Most Metal, Fabric, Ceramic, Glass, Concrete and Wood (1)
: 10 to 15 min (1)
15 min (2)
24 hr (1)
3.5 hr (1)
30 min (1)
5 min (3)
: 10:1 (1)
1:1 (5)
2.5:1 (1)
2:1 (1)
: 326™ Speedbonder™ (1)
5 Minute® (1)
AA 330 Depend (2)
AA 330™ Depend® (2)
AA H8000 Speedbonder (1)
AA H8000™ Speedbonder™ (1)
Depend 330 (1)
Depend® 330™ (1)
Hysol EA E-00NS (1)
Hysol® 1C™ (1)
: -40 to 200 deg F (1)
-65 to 250 deg F Operating/46.4 to 82.4 deg F Storage (1)
130 deg F (1)
180 deg F (2)
250 deg F (4)
300 deg F (2)
: 1-Part Fast Fixture (1)
1-Part General Purpose High Viscosity (1)
2-Component (3)
2-Part General Purpose Fast Cure (1)
2-Part General Purpose High Performance (1)
2-Part General Purpose High Viscosity (1)
2-Part High Performance (1)
2-Part High Performance High Temperature Non-Sag (1)
2-Part High Strength Non-Sag (1)
2-Part Non-Sag (1)
: 0.1% Part A (1)
0.13 g/L Part A, 0.57 g/L Part B (1)
10 g/L (1)
12.87 g/L Part A, 3.04% Part B (1)
18.4 g/L (1)
18.4 g/L Part A, 645.1 g/L Part B (1)
35.5 g/L (1)
7.9 g/L (1)
<0.4 % (1)
<1 % (1)
: 1 min (1)
120 min (1)
15 min (1)
20 min (1)
3 min (1)
3 to 6 min (1)
5 min (3)