content loaded
Simpson Strong-Tie® Strong-Rod™ EDOT22 Epoxy Adhesive, 22 oz Side-By-Side Cartridge, Liquid/Paste Form, Brown/White, 1.52/1.59 at 72 deg F
22oz. epoxy cartridge side by side dot a
Stellar Part #SIMPS EDOT22
MFG Part #EDOT22
MFG Name:Simpson Strong-Tie
Product Description:
Simpson Strong-Tie® Strong-Rod™ Epoxy Adhesive, Series: EDOT, Side-By-Side Cartridge Container, 22 oz Container, Epoxy Base, Composition: (Resin White Side)-Bisphenol A-Epichlorohydrin, Limestone, Talc, O-Cresyl Glycidyl Ether, Titanium Dioxide, Crystalline Silica, Quartz, (Hardener Brown Side) - 2-Piperazin-1-Ylethylamine, Nonylphenol, Crystalline Silica, Quartz, Triethylenetetramine, 2,4,6-Tris-phenol, 4,4'- Methylenebis, Talc, Liquid/Paste Form, 24 hr at 60 deg F, 72 hr at 40 deg F Curing, Brown/White, Ammonia/Mild Odor/Scent, 1.52/1.59 at 72 deg F Specific Gravity, 288/255 deg F Flash Point, 8.8/10.7 pH, 6 g/L VOC, Applicable Materials: Concrete and Masonry
Login For Price
- Item Features
- Technical Specifications
- Resources
- Easy hole cleaning procedure no power-brushing required
- Mixed material in nozzle can harden in 30 min at temperatures of 70 deg F and above
- Use only appropriate Simpson Strong-Tie® mixing nozzle in accordance with Simpson Strong-Tie® instructions
- Modification or improper use of mixing nozzle may impair epoxy performance
- Non-sag or thixotropic paste consistency at 77 deg F
- 127 deg F heat deflection
- 2920 psi at 2 days and 3410 psi at 14 days bond strength (hardened concrete to hardened concrete)
- 2298 psi at 14 days bond strength (Fresh concrete to hardened concrete)
- 0.11% at 24 hr water absorption
- 10390 psi at 7 days compressive yield strength (cured 60 deg F)
- 408100 psi at 7 days compressive modulus (cured 60 deg F)
- When properly mixed, adhesive will be a uniform tan color
- 83 shore D hardness
- Threaded rod anchoring and rebar doweling into concrete and masonry
- Multiple dot listings
- Store between 45 to 90 deg F
- Surfaces to receive epoxy must be clean
- Base material temperature must be 40 deg F or above at the time of installation
- For best results, material should be 70 to 80 deg F at time of application
- To warm cold material, store cartridges in a warm, uniformly heated area or storage container
- Easy hole cleaning procedure no power-brushing required
- Mixed material in nozzle can harden in 30 min at temperatures of 70 deg F and above
- Use only appropriate Simpson Strong-Tie® mixing nozzle in accordance with Simpson Strong-Tie® instructions
- Modification or improper use of mixing nozzle may impair epoxy performance
- Non-sag or thixotropic paste consistency at 77 deg F
- 127 deg F heat deflection
- 2920 psi at 2 days and 3410 psi at 14 days bond strength (hardened concrete to hardened concrete)
- 2298 psi at 14 days bond strength (Fresh concrete to hardened concrete)
- 0.11% at 24 hr water absorption
- 10390 psi at 7 days compressive yield strength (cured 60 deg F)
- 408100 psi at 7 days compressive modulus (cured 60 deg F)
- When properly mixed, adhesive will be a uniform tan color
- 83 shore D hardness
- Threaded rod anchoring and rebar doweling into concrete and masonry
- Multiple dot listings
- Store between 45 to 90 deg F
- Surfaces to receive epoxy must be clean
- Base material temperature must be 40 deg F or above at the time of installation
- For best results, material should be 70 to 80 deg F at time of application
- To warm cold material, store cartridges in a warm, uniformly heated area or storage container
- Applicable Materials:Concrete and MasonryBase Type:EpoxyColor:Brown/WhiteContainer Size:22 ozContainer Type:Side-By-Side CartridgeCuring Time:24 hr at 60 deg F, 72 hr at 40 deg FForm:Liquid/PasteOdor/Scent:Ammonia/MildpH Range:8.8/10.7Series:EDOTSpecific Gravity:1.52/1.59 at 72 deg FVOC Content:6 g/LFlash Point:288/255 deg F